FLYINGVOICE, VoIP & Networking Made Easy

“”There are 173search results

[ FAQ ]

How to use Three Way Conference Calls

Three Way Conference Calls:Three extensions achieve the internal call together. Step 1. To initiate a conference call, press the HOLD button during an active call and the first call is placed on hold, and you will hear a dial tone. Step 2. Dial the second person’s telephone number.After the secon...
[ FAQ ]

How to use port vlan

1. Web page port VLAN page is configured here as PVID, where you specify which port's PVID. For example: here specify WAN: 1, meaning only VLAN; 1 can specify the WAN for the untag, if the other VLAN set up untag will be given, as follows： This is a normal prompt, LAN 1,2,3,4 PVID is 2, the same ot...
[ FAQ ]

How to watch IP address via IP Phone

1.Press menu button, select "Status"and click select. select Internet Port Status to check IP address. 2.For FIP11WP，you can press OK button to check IP address directly. 3.For IP622CWP,you can press HOLD button to check IP address directly.
[ FAQ ]

How to Enable ATA's Repeater function?

1．Wireless repeater Overview Wireless repeater mode, that is wireless AP in the network connection plays a repeater role, To achieve signal repeater and amplification, thus extending the coverage of the wireless network. 2．Wireless repeater network Wireless repeater network mode is relatively simpl...
[ FAQ ]

How to configure WDS?

（1） Both main AP and repeater AP need support WDS,All should use FLYINGVOICE WiFi Routers. （2） In WDS mode The VoIP/tr069/provision function cannot used if not connected wan port of slave AP. Network structure of WDS。 Configure Method: （1） Configure WDS mode, just one AP can set as Lazy mode. 0: Dis...
[ FAQ ]

How to use WPS?

1.Enable WPS Login web GUI,”wireless--WPS”,Enable WPS,click apply. 2.WPS （1）PBC mode “wireless--WPS Progress”，check PBC，click apply. Cell Phone open the advanced settings, click on the "WPS connection", the phone can be connected to WPS wireless. （2）PIN Cell Phone open the advanced settings, cl...
[ FAQ ]

How to set DHCP address pool?

1.Login web GUI,go into “Network-->LAN” page to configure DHCP address pool. 2.You can set LAN IP address,the DHCP Start Address and DHCP End Address are based on the LAN port IP address. Eg:LAN port IP is 192.168.15.1,so DHCP address pool is 192.168.15.XXX~192.168.15.XXX. Notice:If you want to...
[ FAQ ]

How to use L2TP server function?

1.L2TP Server Configuration Login web GUI,go into “Network-->L2TP” page and Enable L2TP Server Enable. You can set Local IP address,the Pool Start Address and Pool End Address are based on the Local IP address. At “Network-->L2TP-->Secrets”，you can set L2TP client’s User Name and Password,the...
[ FAQ ]

How to enable use random SIP port?

Login web GUI,go into “FXS-->SIP Account-->Advanced” page，enable Use Random SIP Port ，click Save button and reboot device. Notes:After Enable Use Random SIP Port, you can select other ports when the local port fails.
[ FAQ ]

How ATAs use IVR?

Use gateway products can follow the following steps to achieve IVR: (1) FXS port connected to the analog phone. (2) Go off-hook and press "****" key to start IVR. Then the user will hear prompt "1. Network port configuration ...". (3) According to different options, pressing any digit between 1 a...

1 2 3 4 5 Last