FLYINGVOICE, VoIP & Networking Made Easy

“”There are 173search results

[ FAQ ]

MWI and VWMI Introduction

What is MWI? A message -waiting indicator(MWI) in telephony, is a Telcordia Technologies(formerly Bellcore) term for an FSK-based telephone calling feature that illuminates an LED on select telephones to notify a telephone user of waiting voicemail messages on most North American public telephone n...
[ FAQ ]

How to use MWI?

Let’s use Flyingvoice G801 as an example, to describe the MWI function. By default, MWI is enabled, please go to SIP Account-->Line 1 page, Supplementary Service Subscription column to check. If someone leaves you a message, when you pick up the handset, there will be special tone to remind user ...
[ FAQ ]

How to use VMWI?

By default, VMWI function is enabled, user can go to SIP Account-->Line 1 page, Supplementary Service Subscription column to check. If the VMWI service is enabled, when someone leaves a message, G801 will send a signal to the analog telephone, the phone will rings shortly, by default, the ringing t...
[ FAQ ]

How to use LTE?

1. Hardware Install Step 1. Connect Line port to analog phone with a RJ-11 cable. Step 2. Check whether the SIM card is connected. Step 3. Connect one port of 4 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly. Step 4. Connect one end of the power c...
[ FAQ ]

How to use OpenVPN?

1. Enable OpenVPN function Select Network-->VPN option and enable openVPN feature. Here if you want PC of LAN port access OpenVPN, please enable “VPN As Default Route”. 2. Upload Certificate to the Device Select the Administration-->certification option and upload the openvpn certificate and c...
[ FAQ ]

How to use VPN

1. PPTP “Network-->VPN-->VPN Settings” VPN Enable select PPTP Enter Initial Service IP，User Name，Password. Click Save then Reboot device. Result “State-->Basic->VPN Status”，Get a Virtual IP Address. 2. L2TP VPN Enable select L2TP Enter Initial Service IP，User Name，Password. Click Save then ...
[ FAQ ]

How to make calls without registration on the adapter

This article introduces three methods to make calls when there is no SIP server and you want to make calls with the adapter. Method 1. Make calls with the calling code ***7 on one adapter Step 1. Go to SIP Account > FXS Settings, select the port that you will use, you can use Batch Settings t...
[ FAQ ]

How to use call forward

1. In the device phone "phone -> Preferences" to find the option to configure the call forward. 2. Call Forwarding .There are three ways to configure a web configuration, as shown in the figure: 3. All Forword is the call directly transferred to the configuration number, as shown: when the call di...
[ FAQ ]

How to use the device's "Diagnosis" function (packet Trace, ping test)

Our device "Diagnosis" function (packet Trace,ping test) is an important tool to analyze the problem, let us analyze the problem faster, the use of the following methods: 1.How to use packet Trace (1) If the device is connected to the Internet via WAN port, select WAN to packet Trace. In the Admin...
[ FAQ ]

how to register SIP accounts over IPv6

1.Enable IPv6 for network and VoIP For network: Enable IPv6 Set WAN Port:For example:IPv6 WAN port set static IPv6. 2.SIP Register 1)SIP Settings 2)Register SIP Account Notes：For IPv6 it is same with IPv4,support TCP ,TLS.

1 2 3 4 5 Last