VoIP Wireless Router
FWR8102

Highlights:

• 4 100M RJ45 ports, 2 FXS RJ11 ports
• 2.4GHz 300Mbps Wi-Fi
• Rich QoS capability in wired and wireless
• Real time FAX over IP via T.38 and T.30 FAX with G.711
• PESQ is above 4.3 in G.711, PESQ is above 3.7 in G.729 
• Auto-Provisioning TFTP/HTTP/HTTPS, TR069, SNMP
  • Overview
  • Features
  • Specifications
  • Download
A Practical and Powerful VoIP Wireless Router
 
The Flyingvoice powerful VoIP Wireless Router FWR8102, FWR8102 includes extended functions which support, and 2 FXS ports. This design not only provide users with a conventional VoIP and routing capabilities. Users can also take FWR8102 as a FTP server, to share LAN files, pictures and other resources. Meanwhile, 2 FXS ports can be well adapted to small and micro enterprises, 1FXS for telephone, 1FXS for Fax, no need to add additional equipment. FWR8102 VoIP wireless router is ideally suited for small and medium enterprises (SMB) to build wireless office.
 
FWR8102 supports IEEE802.11n wireless LAN standard, the highest wireless speed is up to 300Mbps and it supports 2.4 GHz.


 
Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1) Connect Line port to land line jack with a RJ-11 cable.
2) Connect the WAN port to a modem or switch or router or Internet with an Ethernet cable.
3) Connect one port of 4 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly.
4) Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.
5) Push the ON/OFF button to power on the router.
6) Check the Power and WAN, LAN LEDs to assure network connections.
 
Appearance
 
1) Front Panel



2) Back Panel



Ways to configure FWR8102
 
There are three ways to configure FWR8102: use IVR, use provision and use WEB GUI, recommend is WEB GUI. And you can configure only some parameters through IVR, like WAN port IP address, WAN port IP mode, Subnet mask and so on. User presses **** to start IVR, and the IVR will lead you to configure. Every time you finish some changes, you may need reboot FWR8102 to make the changes effective. Details about IVR, please refer to FWR8102 user manual. Provision is also a convenient way to make configurations, to get more information about provision, please refer to provision user manual. And you can configure all the parameters of FWR8102 through WEB GUI, login to FWR8102's webpage, then you can begin to configure.

Following picture is the login page of FWR8102:



And Status page of FWR8102:



User wants to use FWR8102 as a wireless router need to configure in FWR8102's network and wirless page. Details about configuration, please refer to user manual.

The wireless page of FWR8102:



Basic use of FWR8102

1) Connect an analog telephone to FWR8102's FXS port, register an account and make calls;
2) Connect an FAX machine to FWR8102's FXS port, register an account and make calls;
3) Connect ohter devices to FWR8102's LAN port to use FWR8102 as a router;
4) Configure the wireless network of FWR8102, connect  ohter devices to FWR8102, use the wireless network.

Key Features of FWR8102

FWR8102 is the ideal choice for VoIP communication and integrates Internet sharing for daily application.
 
It is a kind of advanced VoIP wireless router, can not only provides the high quality of voice communications and wired Internet sharing capabilities but also offers Access Point (AP) function for daily wireless communication. With advanced router, FWR8102 is able to make calls via SIP proxy voice communications, plus the IP sharing, and the QoS mechanism

Also, the USB ports can make user to connect external storage devices, and realize file sharing via it.
 
The FWR8102 is based on SIP V2.0 and 802.11n standard and compatibility with most service providers. It features 2FXS telephone ports, 5*10M/100Mbps Ethernet ports which brings great convenience when deploying VoIP network.

 
Features/Model FWR8102 FWR8101 FWR8100
Network Ports 4* RJ45 10/100M 5* RJ45 10/100M 5* RJ45 10/100M
FXS Ports 2 2 0
VLAN Yes
WiFi Support 2.4G 2T2R (300Mbps) 2.4G 2T2R (300Mbps) 2.4G 2T2R (300Mbps)
WPS Yes
Voice Codec G.711 (A-law, U-law),  G.729A/B, G.723, G.722 (Wide band)
Management Integrated IVR, Web browser, Auto-provisioning with TFTP/HTTP/HTTPS, TR069, SNMP
Fax T.30, T.38 Fax
FWR8102 Specification

Hardware Features
Interface 1 RJ-45 for WAN port (Ethernet 100 Base-T)
3 RJ-45 for LAN port (Ethernet 100 Base-T)
2 RJ-11 for FXS port
IEEE802.11 b/g/n
Power Supply AC Input : 100-240v, 50-60Hz;  DC Output: 12V, 1A

Environmental 
Operation Temperature: -5~45 Degree C
Storage Temperature: -25~85 Degree C
Relatively Humidity: 10%~90% No Condensing
Shock: Up to 75cm Drop upon package
Dimension (L)173×(W)154×(H)40mm
Unit Weight  332g(without package)
Software Features
Audio Codec Features G.711 (A-Law, u-Law) with PESQ above 4.3
G.729 with PESQ above 3.7
Adaptive Jitter Buffer Management
Voice Activity Detection
Comfort Noise Generation
Echo Cancellation
T.30 FAX with G.711
Real time FAX over IP via T.38
Protocols SIP V2.0 (RFC 3261, 3262, 3263, 3264)
Backward compatible with RFC2543
Session timer (RFC4028)
SDP (RFC2327)
RTP/RTCP (RFC823/903)
NAPTR for SIP URI lookup (RFC2915)
STUN (RFC2030)
ARP/RARP (RFC 826/903)
SNTP (RFC 2030)
DHCP/PPPoE
HTTP Server for Web Management
TFTP/HTTP for Auto Provisioning
Message Waiting Indicator (RFC3842)
DHCP Option Codes for SIP (RFC3361)
DNS/DNS SRV (RFC1706 and RFC 2782)
IEEE802.1Q VLAN/802.1p and IP DSCP
Management Firmware Upgrade
Web Management Interface
IVR-driven Management Interface
Local and Remote Syslog (RFC3164)
Auto Provisioning
SNTP Time Synchronization
Multi User Level
SNMP v2
Telnet
TR069
System Log: local log and remote log
Wireless 4 SSID per Radio
Static WEP(64/128bit)
Dynamic WEP(64/128bit)
AES(CCMP/TKIP)
MAC certification
WEP certification
WPA-PAK/WPA-PSK(2.0)
WPA/WPA2
AP Isolation and MBSSID AP Isolation
WMM
WDS
WPS
Station list
Radius certification and billing
MAC Filter(different from wired MAC Filter)
Applications Support NAT mode and Bridge mode
Support DDNS
MAC address cloning
SIP proxy redundancy
NAT Traversal by STUN
Built-in Wired speed NAT Router
DHCP Server and Client
IP conflict detection
Port Forwarding, DMZ, SuperDMZ
802.1Q VLAN/802.1p, DSCP, Rate Limiting
VPN(PPTP,L2TP, IPSec) Passthrough
SNTP
IGMPv2,IGMPv3
ACL(Access Control List)
Broadcast Strom Control
Mac Filtering
Firewall(SYN Flooding, IP Spoofing, Smurf Attack, Ping of Death, DoS)
Ipv6(Dual Stack)
MLDv1, MLDv2
Call Features 3-way conference
Call hold
Call forwarding
Call Transfer
Call waiting
Caller ID and CWCID
DTMF Relay: In-band, Out-band and SIP INFO
QoS Layer 3
Call Log
CID/CWCID
Dial Plan
DTMF Mode: Inband, outband and SIP Info