SFP GE Router with VoIP
FWR9302

Highlights:

• 5*1000M RJ45 ports, 2 FXS RJ11 ports
• 1 USB port
• 1 Combo SFP port
• 5GHz 867Mbps & 2.4GHz 300Mbps Wi-Fi
• Hardware NAT (HNAT) engine with 1000Mbps NAT/NAPT speed
• Rich QoS capability in wired and wireless
• Real time FAX over IP via T.38 and T.30 FAX with G.711
• PESQ is above 4.3 in G.711, PESQ is above 3.7 in G.729 
• Auto-Provisioning TFTP/HTTP/HTTPS, TR069, SNMP
  • Overview
  • Features
  • Specifications
  • Download
A Practical and Powerful VoIP Wireless Router with SFP
 
The Flyingvoice powerful VoIP Wireless Router FWR9302, FWR9302 includes extended functions which support, SFP port, USB memory card, and 2 FXS ports. This design not only provide users with a conventional VoIP and routing capabilities. Users can also take FWR9302 as a FTP server, to share LAN files, pictures and other resources. Meanwhile, SFP for internet access, 2 FXS ports can be well adapted to small and micro enterprises, 1FXS for telephone, 1FXS for Fax, no need to add additional equipment. FWR9302 VoIP wireless router is ideally suited for small and medium enterprises (SMB) to build wireless office.
 
FWR9302 supports IEEE802.11ac gigabit wireless LAN standard, the highest wireless speed is up to 867Mbps and it supports both 2.4GHz and 5GHz bands.For VoIP end user, 5G band can make sure less interference and the transmission quality. The more, users can enjoy greater bandwidth, and enhanced data throughput.


 
Place Order

FWR8302:2.4G ( 300M ) + 1 SFP+ 1 WAN ( GE ) + 4 LAN ( GE )
FWR7302:2.4G ( 300M ) + 5G ( 867M ) + 1 SFP + 1 WAN ( GE ) + 4 LAN ( GE ) + LTE + USB

Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.
1) Connect Line port to land line jack with a RJ-11 cable.
2) Connect the WAN port to a modem or switch or router or Internet with an Ethernet cable.
3) Connect one port of 4 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly.
4) Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.
5) Push the ON/OFF button to power on the router.
6) Check the Power and WAN, LAN LEDs to assure network connections.
 
Appearance
 
1) Front Panel



2) Rear Panel


 
Ways to configure FWR9302
 
There are three ways to configure FWR9302: use IVR, use provision and use WEB GUI, recommend is WEB GUI. And you can configure only some parameters through IVR, like WAN port IP address, WAN port IP mode, Subnet mask and so on. User presses **** to start IVR, and the IVR will lead you to configure. Every time you finish some changes, you may need reboot FWR9302 to make the changes effective. Details about IVR, please refer to FWR9302 user manual. Provision is also a convenient way to make configurations, to get more information about provision, please refer to provision user manual. And you can configure all the parameters of FWR9302 through WEB GUI, login to FWR9302's webpage, then you can begin to configure.

Following picture is the login page of FWR9302 :



And Status page of FWR9302:


 
User wants to use FWR9302 as a wireless router need to configure in FWR9302's network and wirless page. Details about configuration, please refer to user manual.

The wireless page of FWR9302:
 



Basic use of FWR9302
 
1) Connect an analog telephone to FWR9302's FXS port, register an account and make calls;
2) Connect an FAX machine to FWR9302's FXS port, register an account and make calls;
3) Connect ohter devices to FWR9302's LAN port to use FWR9302 as a router;
4) Configure the wireless network of FWR9302, connect  ohter devices to FWR9302, use the wireless network.

Key Features of FWR9302

FWR9302 is the ideal choice for VoIP communication and integrates Internet sharing for daily application.
 
It is a kind of advanced VoIP wireless router, can not only provides the high quality of voice communications and wired Internet sharing capabilities but also offers Access Point (AP) function for daily wireless communication,The important is the FWR9302 can support SFP for the internet access. With advanced router, FWR9302 is able to make calls via SIP proxy voice communications, plus the IP sharing, and the QoS mechanism
Also, the USB ports can make user to connect external storage devices, and realize file sharing via it.
 
The FWR9302 is based on SIP V2.0 and 802.11n standard and compatibility with most service providers. It features 2FXS telephone ports, 5*10M/100M/1000Mbps Ethernet ports, 1 combo SFP port which brings great convenience when deploying VoIP network.

VoIP Wireless Router Series Comparision


Features
/Model
G801 G802 G902 FWR9202 FWR7202 FWR9302
Network Ports 5* RJ45 10/100M 5* RJ45 10/100M 5* RJ45 10/100/1000M 5* RJ45 10/100M 5* RJ45
10/100M
5* RJ45 10/100/1000M
FXS Ports 1 2 2 2 2 2
USB Ports No 1 1 1 1 1
LTE No No No No Yes No
Wire-Speed NAT Yes Yes Yes Yes Yes Yes
WiFi 2.4G 2T2R (300Mbps) 2.4G 2T2R (300Mbps) 2.4G/5G Dual-Band
(750Mbps)
2.4G/5G Dual-Band
(867Mbps)
2.4G/5G Dual-Band
(750Mbps)
2.4G/5G Dual-Band
(867Mbps)
SFP NO NO NO NO NO 1*SFP
Voice code G.711 (A-law, U-law),  G.729A/B, G.723, G.722 (Wide band)
Management Integrated IVR, Web browser, Auto-provisioning with TFTP/HTTP/HTTPS, TR069, SNMP
Fax T.30, T.38 Fax
 
FWR9302 Specification

Hardware Features
Interface 1 RJ-45 for WAN port (Ethernet 1000 Base-T)
4 RJ-45 for LAN port (Ethernet 1000 Base-T)
2 RJ-11 for FXS port
1 Combo SFP port
IEEE802.11 b/g/n
IEEE802.11 ac
1 USB 2.0 Host Ports 
1 WPS button
Power Supply AC Input : 100-240v, 50-60Hz;  DC Output: 12V, 2A

Environmental 
Operation Temperature: -5~45 Degree C
Storage Temperature: -25~85 Degree C
Relatively Humidity: 10%~90% No Condensing
Shock: Up to 75cm Drop upon package
Dimension (L)187×(W)134×(H)24mm
Unit Weight  350g(without package)
Software Features
Audio Codec Features G.711 (A-Law, u-Law) with PESQ above 4.3
G.729 with PESQ above 3.7
Adaptive Jitter Buffer Management
Voice Activity Detection
Comfort Noise Generation
Echo Cancellation
T.30 FAX with G.711
Real time FAX over IP via T.38
Protocols SIP V2.0 (RFC 3261, 3262, 3263, 3264)
SDP (RFC2327)
RTP/RTCP (RFC823/903)
NAPTR for SIP URI lookup (RFC2915)
STUN (RFC2030)
ARP/RARP (RFC 826/903)
SNTP (RFC 2030)
DHCP/PPPoE
HTTP Server for Web Management
TFTP/HTTP for Auto Provisioning
Message Waiting Indicator (RFC3842)
DHCP Option Codes for SIP (RFC3361)
DNS/DNS SRV (RFC1706 and RFC 2782)
IEEE802.1Q VLAN/802.1p and IP DSCP
IEEE802.3
Management Firmware Upgrade
Web Management Interface
IVR-driven Management Interface
Local and Remote Syslog (RFC3164)
Auto Provisioning
SNTP Time Synchronization
Multi User Level
SNMP v2
Telnet
TR069
System Log: local log and remote log
Wireless 4 SSID per Radio
Static WEP(64/128bit)
Dynamic WEP(64/128bit)
AES(CCMP/TKIP)
MAC certification
WEP certification
WPA-PAK/WPA-PSK(2.0)
WPA/WPA2
AP Isolation and MBSSID AP Isolation
WMM
WDS
WPS
Station list
Radius certification and billing
MAC Filter(different from wired MAC Filter)
Applications Support NAT mode and Bridge mode
Support DDNS
MAC address cloning
SIP proxy redundancy
NAT Traversal by STUN
Built-in Wired speed NAT Router
DHCP Server and Client
IP conflict detection
Port Forwarding, DMZ, SuperDMZ
802.1Q VLAN/802.1p, DSCP, Rate Limiting
VPN(PPTP,L2TP, IPSec) Passthrough
SNTP
IGMPv2,IGMPv3
ACL(Access Control List)
Broadcast Strom Control
Mac Filtering
Firewall(SYN Flooding, IP Spoofing, Smurf Attack, Ping of Death, DoS)
Ipv6(Dual Stack)
MLDv1, MLDv2
Call Features 3-way conference
Call hold
Call forwarding
Call Transfer
Call waiting
Caller ID and CWCID
DTMF Relay: In-band, Out-band and SIP INFO
QoS Layer 3
Call Log
CID/CWCID
Dial Plan
DTMF Mode: Inband, outband and SIP Info