VoIP Wireless Router with 1 FXS


1*10/100M RJ45 port, 4*10/100M RJ45 ports, 1 FXS port
• IEEE802.11n 2T2R 300Mbps wireless

Wireless working frequency is 2.4G
• Hardware NAt(HNAT) engine with 100Mbps NAT/NAPT speed
• Wireless throughput is above 80Mbps in average
Real time FAX over IP via T.38 and T.30 FAX with G.711
• PAMS is above 4.0 with G.729 Codec
• Field proven compatibility and stability, QoS supported
• Auto-Provisioning-TFTP/HTTP/HTTPS, TR069
and SNMP
  • Overview
  • Features
  • Specifications
  • Download
What this product does

A Powerful VoIP Wireless Router
The Flyingvoice powerful VoIP Wireless Router G801, which has one FXS port, four LAN ports and one WAN port,  is a wireless router with embedded VoIP ATA functions.  This product will not only allow you to make ATA call using your broadband connection, but also it provides Wi-Fi router function, make you enjoy easy network atmosphere. What's more, G801 support T.38 real time FAX and T.30 Fax with G.711.

The G801 VoIP Wireless Router is a stand-alone device, which requires no PC to make Internet calls. This product guarantees clear and reliable voice on Internet, which is fully compatible with SIP industry standard and able to inter operate with many other SIP devices and software on the market.

Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1) Connect Line port to land line jack with a RJ-11 cable;
2) Connect the WAN port to a modem or switch or router or Internet wih an Ethernet cable;
3) Connect one port of 4 LAN ports to your computer with a RJ-45 cable. This device allows you to connect 4 PCs directly;
4) Connect one end of the power cord to the power port of this device. Connect the other end to the wall outlet of electricity.
5) Push the ON/OFF button to power on the router;
6) Check the Power and WAN, LAN LEDs to assure network connections.


1) Front Panel

2) Rear Panel

Ways to configure G801
There are three ways to configure G801: use IVR, use provision and use WEB GUI, recommend is WEB GUI. And you can configure only some parameters through IVR, like WAN port IP address, WAN port IP mode, Subnet mask and so on. User presses **** to start IVR, and the IVR will lead you to configure. Every time you finish some changes, you may need reboot G801 to make the changes effective. Details about IVR, please refer to G801 user manual. Provision is also a convenient way to make configurations, to get more information about provision, please refer to provision user manual. And you can configure all the parameters of G801 through WEB GUI, login to G801's webpage, then you can begin to configure.

Following picture is the login page of G801:


And Status page of G801:

User wants to use G801 as a wireless router need to configure in G801's network and wirless page. Details about configuration, please refer to user manual.

The wireless page of G801:

Basic use of G801

1) Connect an analog telephone to G801's FXS port, register an account and make calls;
2) Connect an FAX machine to G801's FXS port, register an account and make calls;
3) Connect ohter devices to G801's LAN port to use G801 as a router;
4) Configure the wireless network of G801, connect  ohter devices to G801, use the wireless network.

Key Features of G801

G801 is the ideal choice for VoIP communication and integrates Internet sharing for daily application.

G801 not only provides the high quality of voice communications and wired Internet sharing capabilities but also offers Access Point (AP) function for daily wireless communication. With advanced router, G801 is able to make calls via SIP proxy voice communications, plus the IP sharing, and the QoS mechanism.

The G801 is based on SIP V2.0 and 802.11n standard and compatibility with most service providers. It features 1FXS telephone ports, 5 10M/100Mbps Ethernet ports which brings great convenience when deploying VoIP network.

VoIP Wireless Router Series Comparision

Features/Model G801 G802 G902 FWR9202 FWR7202 FWR9302
Network Ports 5* RJ45 10/100M 5* RJ45 10/100M 5* RJ45 10/100/1000M 5* RJ45 10/100M 5* RJ45
5* RJ45 10/100/1000M
FXS Ports 1 2 2 2 2 2
USB Ports No 1 1 1 1 1
LTE No No No No Yes No
Wire-Speed NAT Yes Yes Yes Yes Yes Yes
WiFi 2.4G 2T2R (300Mbps) 2.4G 2T2R (300Mbps) 2.4G/5G Dual-Band
2.4G/5G Dual-Band
2.4G/5G Dual-Band
2.4G/5G Dual-Band
Voice code G.711 (A-law, U-law),  G.729A/B, G.723, G.722 (Wide band)
Management Integrated IVR, Web browser, Auto-provisioning with TFTP/HTTP/HTTPS, TR069, SNMP
Fax T.30, T.38 Fax

G801 Specification

Hardware Features
Interface 4*10/100Mbps LAN ports
1*10/100Mbps WAN port
1*FXS port
2*5dB Antenna for IEEE802.11n 2T2R Wireless
1 Power set
Power Supply AC Input : 100-240v, 50-60Hz;  DC Output: 5V, 2A

Operation Temperature: 5~45 Degree C
Storage Temperature: -25~85 Degree C
Relatively Humidity: 10%~90% No Condensing
Shock: Up to 75cm Drop upon package
Dimension (L)180×(W)110×(H)30mm
Unit Weight  338g(without package)
Software Features
Audio Codec Features G.711 (A-law, u-Law)with PAMS above 4.3
G.729A/AB with PAMS above 4.0
Adaptive Jitter Buffer Management
Voice Activity Detection 
Comfort Noise Generation
Echo Cancellation
T.30 FAX with G.711
Real time FAX over IP via T.38
Protocols SIP V2 (RFC 3261,3262,3263,3264)
Backward Compatible with RFC2543
Session Timer (RFC4028)
SDP (RFC2327)
RTP/RTCP (RFC1889 and RFC1890)
NAPTR for SIP URI Lookup (RFC2915)
STUN (RFC 3489)
ARP/RARP (RFC 826/903)
SNTP (RFC 2030)
HTTP Server for Web Management
TFTP/HTTP for Auto Provisioning
Message Waiting Indicator (RFC3842)
DHCP Option Codes for SIP (RFC3361)
DNS/DNS SRV (RFC1706 and RFC 2782)
IEEE802.1Q VLAN/802.1p and DSCP
Management Firmware Upgradeable
Web Management Interface
IVR-driven Management Interface
Local and Remote Syslog (RFC3164)
Auto Provisioning
SNTP Time Synchronization
Multiple User Level
System Log: local log and remote log
Wireless 802.11b/g/n support
Static WEP (64/128bit)
Dynamic WEP (64/128bit)
MAC Certification
WEP certification
AS Isolation and MBSSID AP Isolation
Station list
Radius certification and billing
MAC Filter (different from MAC Filter)
Applications Support NAT mode and Bridge mode
Support DDNS
MAC address cloning
SIP proxy redundancy 
NAT Traversal by STUN
Built-in Wired speed NAT Router
DHCP Server and Client
IP conflict detection
Flow Control
VPN Pass through (PPTP,L2TP and IPSec)
Port forwarding and DMZ host
Rate Limit per port
Broadcast Storm Control
Classification by physical port, IP port, 802.1p,DSCP and TCP/UDP port
Marking by 802.1p and DSCP
MAC filter per port
Packer filter for port, IP address, protocol and physical port
Firewall defend attack and UDP flooding
Call Features 3-way Conference
Music on hold
DTMF Relay: In-band, Out-band and SIP INFO
Call Hold
Call Forwarding
Call Mute
Call Transfer
Call Waiting
Speed Dial
Caller ID and CWCID
QoS Layer 3
Real time fax over IP via T.38
T.30 FAX with G.711
Dial Plan
Black List
Call Log
Dial Plan
DTMF Mode: Inband, Outband and SIP Info